Aluminum Transmission Cooler Pan Excessive high operating temperatures are the primary cause of transmission failure.  This aluminum pan has fins inside and outside to pull the heat out of your transmission oil.  It features a convenient drain plug, a tapped thread hole for a heat gauge sensor and increased capacity for an extra quart of oil.  Easy to install and includes new bolts for installation.                

Final Drive Cover

This new final drive cover is also a cooler.  It is all aluminum and will keep your gear lube cooler, which helps reduce the risk of oil leaks.  This new pan has a drain plug that makes changing the final drive oil easier and less of a dirty job.  It comes with two predrilled holes, which are plugged  One for filling and one for a temperature sensor.  Both of these additional holes are plugged.  the cover comes with a new gasket and new mounting holes                       

Double Battery Tray

This tray is rust proof aluminum and will replace the original steel battery tray.  The new tray bolts to the original braces.  It will easily hold two large group 27 batteries.  It is light weight and ball-burnished for long life.                      

Triple Battery Tray

This aluminum battery tray is a direct replacement for the original battery tray.  It mounts on the existing brackets, but this one will hold three batteries or two batteries, with storage area for extra oil, power steering fluid or brake fluid.                     

Driver’s Side Battery Tray

This aluminum tray allows you to have a battery on the driver’s side of the coach. It mounts just above and slightly behind the steering gear box.                    

Slide-Out Rear Battery Tray

This slide-out rear battery tray makes checking battery fluid level easy. The tray holds 2 large, 12 volt, 2 golf-cart, or one 4-D battery.  It is made of solid cast aluminum so rust or corrosion will not be a problem.        

Aluminum Entrance Step

This is one of our most popular items!  It is designed for strength and durability.  This step bolts directly to the frame and body and is almost impossible to damage since it fastens with four grade 8 bolts and rides no lower than the frame of the motor home. The that it easily folds up out of the way for travel.          

Front Vent Window Wind

Wings

These are clear plexiglass air deflectors that greatly improve the air flow in our out of the small slider window next to the driver and passenger seats. They are mounted on an adjustable cast aluminum base that is easy to install on the vertical post between the windshield and slider window.          

ALCOA Aluminum Wheels 

Most people say that changing over to aluminum wheels has made a significant.been the  single most effective improvement they have made to the ride and   performance of tht we now eir  GMC.   This is mostly due to the improved feel and balance of the Allow  wheels.  The original steel wheels are now from 36 to 41 years old!  Most of them are bent, out of round and just not easy to balance. The Aluminum wheel are very easy to balance and true the wheels. This give you the smoothest ride you may have ever had in your GMC.  Just ask an owner with Alcoa wheels.                  

Aluminum Wheel Center Caps

Now in stock - Machined Aluminum wheel center caps. These are the solid aluminum center hub caps with the letters GMC engraved. Fits Alcoa Aluminum wheels.          

Nose Handle 

This handle is mounted on the nose of the coach between the wipers.  it gives you something to grab onto when cleaning the windshields.  It also has three holes on the top side to display. .          

Lockable Storage Box -

Lockbox

Protect your valuables!  This heavy walled cast aluminum strong box mounts to the floor of your coach or inside a closet or cabinet.  It features a hardened steel lock.  Size 4"x10"x5".          

Inside Door Pull - Door Handle

This handle is a replacement for the original leather handle on the inside of the entrance door. Shiny Aluminum.          

Handy Engine Compartment

Storage Tray

This tray holds bottles of oil, ATF, brake fluid, etc.    It mounts on the passenger side of the engine compartment on top of flat head light housing and corner of fender flange.          

License Plate Bumper Step

This step mounts using existing license plate mounting holes and folds down as a step.  Front license plate attaches to opposite side and reveals when step is folded up.          

”Dogbone” - Internal Air Bag

Emergency Spacer Block

This item is intended to be used as an emergency airbag support.  When you have a blown airbag, This spacer can be inserted inside the blown bag.  To install, simply block the wheels, jack the coach up and cut a 6x6 flap in the airbag to insert the dogbone.  It will support coach for transport to another location or until another airbag can be obtained. .